Agrowtek ADi Use And Maintenance Instructions - Page 11

Browse online or download pdf Use And Maintenance Instructions for Water Pump Agrowtek ADi. Agrowtek ADi 11 pages.

Print Page

Maintenance

AgrowDose pumps are low maintenance and have a durable DC motor and non-servicable gear box for very

long life. Pump tubing on older models is non-servicable and the pump heads are replaced as units with

new rollers, tubing and lubricant. Newer model pumps have servicable heads for replacing only the tubing.

Servicing the Pump Head

When the tubing wears out from extended use, the head or tubing must be replaced. Pump heads typically

last 12-24 months depending on the volumes being dispensed and frequency of use. When the tubing be-

gins to leak, replacement is a simple process:

1. Rotate the pump head counter-clockwise 1/8 turn.

2. Slide the head off of the motor shaft.

If the tubing in the head is accessible:

3. Remove the roller cassett and tubing.

4. Transfer the retention clamps to the new tube.

5. Lubricate the tubing. (Knight KTL-20 Tube Lube)

6. Re-install the tubing and roller cassett.

Re-install the head onto the shaft (align to the flat on the shaft) and twist-lock the head into position.

Storage

Store equipment in a clean, dry environment with ambient temperature between10-50°C.

Disposal

This indsutrial control equipment may contain traces of lead or other metals and environmental contami-

nants and must not be discarded as unsorted municipal waste, but must be collected separately for the

purpose of treatment, recovery and environmentally sound disposal. Wash hands after handling internal

comonents or PCB's.

Agrowtek Inc. warrants that all manufactured products are, to the best of its knowledge, free of defective material and workman-

ship and warrants this product for 1 year from the date of purchase. This warranty is extended to the original purchaser from the

date of receipt. This warranty does not cover damages from abuse, accidental breakage, or units that have been modified, altered,

or installed in a manner other than that which is specified in the installation instructions. Agrowtek Inc. must be contacted prior to

return shipment for a return authorization. No returns will be accepted without a return authorization. This warranty is applicable

only to products that have been properly stored, installed, and maintained per the installation and operation manual and used for

their intended purpose. This limited warranty does not cover products installed in or operated under unusual conditions or envi-

ronments including, but not limited to, high humidity or high temperature conditions. The products which have been claimed and

comply with the aforementioned restrictions shall be replaced or repaired at the sole discretion of the Agrowtek Inc. at no charge.

This warranty is provided in lieu of all other warranty provisions, express or implied. It is including but not limited to any implied

warranty of fitness or merchantability for a particular purpose and is limited to the Warranty Period. In no event or circumstance

shall Agrowtek Inc. be liable to any third party or the claimant for damages in excess of the price paid for the product, or for any

loss of use, inconvenience, commercial loss, loss of time, lost profits or savings or any other incidental, consequential or special

damages arising out of the use of, or inability to use, the product. This disclaimer is made to the fullest extent allowed by law or

regulation and is specifically made to specify that the liability of Agrowtek Inc. under this limited warranty, or any claimed exten-

sion thereof, shall be to replace or repair the Product or refund the price paid for the Product.