Higi Technology iGlucose Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Blood Glucose Meter Higi Technology iGlucose. Higi Technology iGlucose 4 pages.
Also for Higi Technology iGlucose: Using Manual (6 pages)

Print Page
Setting up your
1
Press and hold
to power
on the device. You may need
to charge the device (takes
2-3 hours to fully charge),
then unplug before using.
5
When you see
and "Apply
a drop of blood" on the screen,
place your pierced finger on the
top of the test strip. The entire
line on the test strip should
change from yellow to red. If your
blood sample doesn't fill the line,
remove the lancet and start again.
iGlucose
2
Grab your iGlucose lancing
device, a sterile lancet, and your
vial of iGlucose test strips. Press
and hold the
button to power
on the device.
6
The meter will count down from
5, then display your result. You'll
see "Reading transmitted and
recorded" when it has been
sent to your Care Everyday
Care Manager.
2
1
Glucometer
®
3
Press
to choose
if
you're taking your blood
glucose test before eating or
if you're taking it within two
hours of eating.
7
Your test is complete! Please see
the user manual for instructions
on removing and discarding
used lancets and test strips.
4
Grab a test strip and insert it into
the meter from the right with the
arrow pointing down towards the
opening (test strip port). Close
the vial of test strips right away.