Coraid EtherDrive SR1521T Installation Manual - Page 3

Browse online or download pdf Installation Manual for Storage Coraid EtherDrive SR1521T. Coraid EtherDrive SR1521T 5 pages.

Print Page
Package Contents
•
One CED4U15ST shelf assembly
•
IEC power cord(s)
•
Screws to mount SATA disk to disk drive trays
Safety Precautions
•
CED4U15ST weighs more than 50 pounds. Use 2 people to lift unit to avoid injury.
•
CED4U15ST has hot swap power modules. Disconnect the power cord from the power
supply module before removing the module.
Quick Installation in 3 easy steps
1. Cabinet Installation and Power Connection
a.
Locate the shelf in a location we good ventilation and maintain an operating temperature of between 15-25
degrees Celsius. We recommend the sys admin/installer attach a unique shelf number label to the front of
the chassis for easy storage unit identification. This shelf number will be used by the sys admin in the first
steps of configuration via the storage units console port once physical installation is complete.
b.
The power supplies in the shelf are auto sensing universal voltage (115/230VAC, 50/60Hz) and they come
with IEC connectors. The CED4U15ST shelf is supplied with three power cords for USA power systems.
Other user supplied IEC adapter cords may be required to meet power plug needs outside the USA. Coraid
highly recommends that the SR1521T be connected to an uninterruptable power source (UPS).
c.
After connection to an AC power source, press the power switch located on the front panel of the unit and
observe that the units fans are operational. The shelf is now ready for disks to be installed.
2. SATA Disk installation
®
a.
EtherDrive
Storage is designed to accommodate standard 3.5" SATA disk drives. Press the colored
release tab located on the drive tray door to release the drive tray from its locking position and extend the
extraction handle to withdraw the drive tray.
Coraid Inc.
AC Power
KVM
Console Port
Ethernet Ports
Chassis Rear View
Page 3