Maico MA 28 Quick Manual - Page 2

Browse online or download pdf Quick Manual for Measuring Instruments Maico MA 28. Maico MA 28 2 pages.

Print Page

Explanation of the Function Keys (F1-F4)

Function

screen

Button

screen

4 TEST PREPARATION

Step 1: Preparing the patient for a test

✓ Put the patient at ease and instruct on the test procedure:

"I'm going to place these headphones on your ears. You will hear some beeping sounds. Press the patient

response switch (or raise your hand) as soon as you hear the beep, even if it is very soft."

✓ Have the patient sit at an angle with his/her back to the tester/audiometer, so that the patient cannot see

the adjustments made on the audiometer.

Step 2: Place the headphones on the patient

✓ Place the headphones on the patient with the RED phone on the RIGHT ear and the BLUE phone on the

LEFT ear. Make sure the headband sits snuggly on the crown of the head and the earphones are centered

over both ears.

Step 3: Familiarize the patient with the test procedure

✓ Familiarization with the test procedure is recommended prior to starting the actual test. This is typically done

by starting in the better hearing ear at 1000 Hz or higher and at an elevated level (i.e. dB HL).on with the

test procedure is recommended prior to starting the actual test. level (i.e. dB HL).

5 MANAGING TEST RESULTS

There are three options to manage test results stored on the device:

• Save results to the internal database.

• Print results (optional printer required)

• Transfer result to the PC software (optional MAICO Sessions software required).

For further information ask your local distributor or MAICO Diagnostics GmbH, Sickingenstr. 70-71, 10553 Berlin, Germany

Tel.:+49 30 70 71 46-50 • Fax: +49 30 70 71 46-99 • E-mail: [email protected] • Internet: www.maico.biz

8507409 Rev. 2

Label

Description

Air

Selection between Air or Bone conduction transducer.

Bone

Right

Selection between Right or Left ear

Left

Steady

Pulse

Type of signal presented. Options include Steady, Pulse, Warble, Pulse

and Warble (P&W).

Warble

P&W

To move to the 2

To delete single stored measurement. Set device with the ear, test type and

Del

frequency to delete the measurement.

New

To delete all stored results for starting a new test.

To print test results. (Optional printer required)

To move to the 3rd menu screen.

Activates Hughson-Westlake automatic air conduction threshold test.

Save DB

To save results to internal database.

View DB

To view results saved to the internal database.

To move to the 4

No function

To move to Settings menu.

Back

Returns the function key selection to the 1

menu screen.

2 of 2

MA 28 – Quick Guide

menu screen.

11/05/2020