AFL FlexScan FS300 Quick Reference Manual - Page 18
Browse online or download pdf Quick Reference Manual for Measuring Instruments AFL FlexScan FS300. AFL FlexScan FS300 20 pages. With smartauto and linkmap
Print Page
1
While in the Results view, touch Menu icon
1
2
Touch 'Save As'.
2
3
Edit [Project], [End1], [End2], [Cable] and [Fiber#] names used to
3
identify saved results: touch any field to edit it. Touch Done when
finished.
4
Select if results are to be saved in SOR and/or PDF file format.
4
5
Touch Results to view, navigate and select destination Project/
5
Fiber Group folder. Touch Back
6
If needed for bi-directional testing: Touch Menu ;
6
then touch Swap Ends.
7
7
Touch Done to save test results.
Saving Results for Bi-directional Reporting:
Results must be obtained and stored from each end of the network.
•
Bi-directional averaging and report generation is performed using
TRM 3.0.
To ensure TRM can associate results from both ends, proper naming of test results is critical:
•
Use same Project name and Fiber Group name when testing from each end.
•
Fiber Group name created from End1, End2 and Cable names.
•
Use same End1 and End2 names.
•
– End1 and End2 names must be swapped when testing from End2.
– Reset fiber number to same starting fiber when testing from End2.
Saving Results
.
to return to Save As screen.
18
3
5
3
7
3
1
2
4
3
3
6