Galvin Engineering 656512 Installation Manuallines - Page 3

Browse online or download pdf Installation Manuallines for Plumbing Product Galvin Engineering 656512. Galvin Engineering 656512 5 pages. Ss vandal resistant d/f plate assembly for pneumatic inwall cistern w/ cp bs raised buttons

Print Page

Product Installation Guidelines

INSTALLATION

INSTALLATION COMPLIANCE: Galvin Engineering products must be installed in accordance with these

installation instructions and in accordance with your local regulatory requirements. Water and/or electrical supply

conditions must also comply to the applicable national and/or state standards. Failing to comply with these

provisions shall void the product warranty and may affect the performance of the product.

Assemble the push buttons and faceplate.

Insert the pneumatic push buttons into the

faceplate and fasten together using hex nuts.

Ensure the rubber washers are placed in

between the faceplate and the hex nuts.

Connect the pneumatic tubes to the push

buttons.

Connect one end of the air tube to the push

button and the other end to the cistern.

Ensure the tube is connected to the correct

button (half or full flush).

Check if the connections are tight and secure.

Check if both buttons are operational and

check the air tubes for leaks

Version 1, 6

July 2022, Page 3 of 5