Dynex DX-TVM113 Assembly Manual - Page 10
Browse online or download pdf Assembly Manual for TV Mount Dynex DX-TVM113. Dynex DX-TVM113 13 pages. Slim-profile tv wall mount
Also for Dynex DX-TVM113: Quick Setup Manual (2 pages)
Print Page
10
DX-TVM113
STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed
backs
1 Align the left and right TV brackets (B and C) with the screw holes on the back of the TV. Make sure that the
brackets are level.
2 Place spacers (H or N) behind the TV brackets. If you are using M4 washers (F), place them between the
spacers and TV brackets and over the holes in the TV brackets. If you are using M6 washers (G), place them
over the holes in the TV brackets. Insert screws (E, K, or M) through the washers, TV brackets, and spacers.
3 Tighten the screws until they are snug against the TV brackets. Do not over tighten.
You'll need
Screws
or
E (4)
or
M (4)
Washers
or
K (4)
F (8)
Level
or
or
Spacers
or
N (4)
G (4)
H (4)
Phillips screwdriver
Installation instructions
or
E
or
B and C TV brackets