Dynisco 1480 Operating Manual - Page 3

Browse online or download pdf Operating Manual for Touch Panel Dynisco 1480. Dynisco 1480 18 pages. Dynisco 1480 1/8 din indicator

Print Page

From lab to production,

providing a window into the process

Option Module Connectors

Not used

Option Slot 2

Connector PL4A

Option Slot 1

Connectors

PL7 & PL8

Panel Mounting

The mounting panel must be rigid, and may be up to 6.0mm

(0.25inch) thick. Cut-out sizes are:

Cut-Out Dim A = 92mm

Cut-Out Dim B = 45mm

For n multiple instruments mounted side-by-side, cut-out A is 96n-4mm

Mounting Panel

Instrument

Ratchets

NOTE: For an effective IP66 seal against dust and moisture, ensure gasket is well

compressed against the panel, with the 4 tongues located in the same ratchet slot.

Housing

Gasket

P/N: n/a

www.dynisco.com

1. Insert instrument into the

panel cut-out.

2. Hold front bezel firmly

(without pressing on display

area), and re-fit mounting

clamp. Push clamp forward,

using a tool if necessary, until

gasket is compressed

and instrument held firmly

in position.

Rev: n/a

ECO: n/a

-3-

Not used

Option Slot 3

Connector PL4B

Tolerance +0.5, -0.0mm