Coralife Bio Cube Instructions Manual - Page 7

Browse online or download pdf Instructions Manual for Accessories Coralife Bio Cube. Coralife Bio Cube 13 pages. Size 16
Also for Coralife Bio Cube: Instructions Manual (12 pages)

Print Page

Lighting Startup Operation

1. Plug the power supply into an acceptable

outlet or power source. Be sure to incorporate

a "drip loop" to prevent water droplets from

running down the cord and into the outlet should

any water get onto the cord.

2. Turn the hood on and follow instructions below

to program the timer.

Timer Programming Instructions

Selecting a Program:

1. Press MENU and then use the UP or DOWN

arrows to search for your desired program.

•

ALL = All LEDs will turn on (at full power)

•

LC1 = Only Daytime LEDs will turn on

•

LC2 = Only Sunrise/Sunset LEDs will turn on

(They will start at low power and increase

incrementally over 30 minutes)

•

LC3 = Only Moon Glow LEDs will turn on

(They will start at low power and increase

incrementally over 60 minutes)

•

CLO = Set the timer for all LEDs (You must

press MENU again to set the clock and

program the timer)

•

SHO = Demo mode will turn on

Demo (SHO) Mode:

Perfect for showcasing your new LED Lighting, this

mode cycles through a 24-hour lighting sequence in

just 3 minutes.

• Sunrise: 30 sec

• Moonrise: 30 sec

• Day Time: 60 sec • Moonset: 30 sec

• Sunset: 30 sec

• Night Time: 60 sec

Please Note: Except under CLO mode, pressing MENU

again or waiting 30 seconds without pressing anything

will exit back to clock display. Pressing MENU in CLO

mode will enter clock and timer program mode.

To Set Time of Day (CLO Mode):

1. Choose 12 or 24 Hour Mode:

a. '12H' will appear on the display. Press the

UP arrow key to change to '24H' clock mode.

Pressing the DOWN arrow key will change

the mode back to '12H'.

2. Press MENU to move to the next step.

' ' will appear on the screen to indicate clock

setting function. If 12H mode was selected, clock

will display '12:00am' with the '12' blinking. If

24H mode was selected, will display '0:00am'

with the '0' blinking.

4. Press arrow keys UP or DOWN to set the hour.

5. Press MENU to move to minutes. Use the arrow

keys UP or DOWN to set the minutes.

6. When time setting is complete, press MENU to

move to the next step – Programming Channel 1.

Programming Channel 1 - Daylight LEDs

'1' and 'On' will appear on the screen to indicate

timer setting for channel 1.

7. Press arrow keys UP or DOWN to set the hour.

TIMER INSTRUCTIONS

8. Press MENU to move to minutes. Use the arrow

keys UP or DOWN to set the minutes.

9. Press MENU to move to 'off' time for channel 1.

Repeat steps 7 and 8.

10. When Channel 1 programming is complete press

MENU to move to the next step – Programming

Channel 2.

Programming Channel 2 - Color Enhancing

LEDs (Automatic Sunrise/Sunset Function)

'2' and 'On' will appear on the screen to indicate

timer setting for channel 2.

11. Press arrow keys UP or DOWN to set the hour.

12. Press MENU to move to minutes. Press arrow

keys UP or DOWN to set the minutes.

13. Press MENU to move to 'off' time for channel 2.

Repeat steps 11 and 12.

14. When Channel 2 programming is complete press

MENU to move to the next step – Programming

Channel 3.

When setting Channel 2 the start time and stop time

will indicate when Sunrise mode will initially light up

and when Sunset mode will initially dim down. LEDs

will gradually ramp up or dim down for 30 minutes

from the set time.

Programming Channel 3 - Moon Glow LEDs

(Automatic Moonrise/Moonset Function)

'3' and 'On' will appear on the screen to indicate

timer setting for channel 3.

15. Press arrow keys UP or DOWN to set the hour.

16. Press MENU to move to minutes. Press arrow

keys UP or DOWN to set the minutes.

17. Press MENU to move to 'off' time for channel 3.

Repeat steps 15 and 16.

18. When Channel 3 programming is complete press

MENU to Exit programming mode and return to

the clock time display.

When setting Channel 3 the start time and stop time

will indicate when Moonrise mode will initially light up

and when Moonset mode will initially dim down. LEDs

will gradually ramp up or dim down for 60 minutes

from the set time.

Timer Function Notes:

•

If at any time in programming the timer there

is no activity for 30 seconds the timer will

immediately return back to clock time display.

•

If at any time the power is turned off the

following will occur when the hood is

reactivated:

Setting will default to the programmed

settings (CLO Mode)

If in daytime – the Sunrise feature will

start automatically. Maximum brightness

will occur after 30 minutes.

If in nighttime – the Moonrise feature will

start automatically. Maximum brightness

will occur after 60 minutes.