AGS Merlin Installation & Operation Instructions - Page 16
Browse online or download pdf Installation & Operation Instructions for Gas Detectors AGS Merlin. AGS Merlin 16 pages. Refrigerant gas detector tft
Also for AGS Merlin: User & Installation Manual (5 pages), User & Installation Manual (6 pages), Installation & Operation Manual (12 pages)
Print Page
Merlin Gas Detector Installation & Operation Instructions
Installation Details
Please pass this manual to the system owner / user.
Date of Installation:
Installation Location:
Organisation:
Stamp/Signature of the installer:
We recommend all Merlin gas detection equipment be commissioned by competent/trained engineers to
ensure correct installation and operation. The Merlin range of gas detectors are calibrated when
manufactured, however, we strongly recommend the detectors response and alarm signals are tested and
validated once installed. This will ensure the equipment performs as intended and is free from any
unforeseen damage caused by transit/installation.
Every effort is made to ensure the accuracy of this document; however, AGS can assume no responsibility for any errors or
omissions in this document or their consequences. AGS would greatly appreciate being informed of any errors or omissions that
may be found in the content of this document. For information not covered in this document, or if there is a requirement to send
comments/corrections, please contact AGS using the contact details given below.
American Gas Safety LLC
Head office:
6304 Benjamin Road, Suite 502, Tampa, FL 33634
Tel:
(727) 608-4375
American Gas Safety LLC is the owner of this document and reserves all rights of modification without prior notice.
Page 16 of 16
Rev 01