Galvin Specialised Ezy-Drink TD90L Product Installation Manualline - Page 2

Browse online or download pdf Product Installation Manualline for Plumbing Product Galvin Specialised Ezy-Drink TD90L. Galvin Specialised Ezy-Drink TD90L 4 pages. Lever bubbler tapware

Print Page

PRE-INSTALLATION - MOUNTING DETAILS

−

TD90L - If the mounting holes do

not already exist, mark out and drill

the holes in the wall/sheet, as

shown in rough-in dimensions.

Note: Before installation, all lines must

be flushed. We recommend that a line

strainer be installed prior to drinking

taps to eliminate any foreign material.

50.5

TO SUIT

SCREWS

USED

INSTALLATION

IMPORTANT: Galvin Specialised products must be installed in accordance with these installation

instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water

and/or electrical supply conditions must also comply to the applicable national and/or state standards.

Failing to comply with these provisions shall void the product warranty and may affect the performance of

the product.

1. Fit tap assembly

− When applying thread tape or sealant to

the inlet, ensure the opening is not

obscured. Failure to do so may restrict or

block the flow restrictor, affecting the flow

of water.

ASSEMBLY

(SIDE VIEW AS

INSTALLED)

135 NOM

1/2" BSP

2. Secure the body

− Secure the body with supplied screws.

− Ensure outlet is 15° angled.

Version 2, 8 June 2017, Page 2 of 4

120

70°

1/2" BSP

TD45L

15°

ASSEMBLY

(AS SEEN BY USER)

TD90L