Coram Showers OPTIMA PIVOT DOOR Instructions - Page 4

Browse online or download pdf Instructions for Shower Cabins Coram Showers OPTIMA PIVOT DOOR. Coram Showers OPTIMA PIVOT DOOR 4 pages.

Print Page
7
a
a: Push fit the water seal to the bottom of door. IMPORTANT: The water seal flap MUST be on the inside of the door.
b: From the outside only, apply sealant to the bottom of the enclosure and 50mm up the wall channels as shown.
Packaging:- The cardboard and polythene parts of this packaging can be recycled.
End of life:- This product contains materials such as aluminium and glass which can be recycled.
IMPORTANT: You must not use the shower for 24 hours after installation of the enclosure.
DO NOT use bleach, scouring powders, solvents or other aggressive cleaning agents. To clean, use warm soapy water and a
clean cloth and rinse off.
Please note: There has been a glass coating applied to this product, use a squeegee to remove water and debris.
Periodically check all fixings and tighten if necessary.
Stanmore Industrial Estate, Bridgnorth, Shropshire WV15 5HP, UK • Tel: 01746 766466 • Fax: 01746 764140 • www.coram.co.uk
Please contact your local authority to find your nearest recycling centre.
CORAM SHOWERS LTD
b
50mm
Recycling