mailcoms 1E42 Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Printer mailcoms 1E42. mailcoms 1E42 8 pages.

Print Page

Aligning the Label Roll

Press the

button and check that the label feeds out correctly.

Note- If the label does not feed correctly please refer to label alignment

instructions inside the printer top cover.

Tear off the correctly dispensed label.

Connecting the USB Cable

Connect your printer to your computer with the USB cable.

Note- Ignore any Windows errors that may occur at this time and continue

with Step 9.

Downloading the Printer Driver

Ensure you are signed into SendPro

Select the Datamax Printer Driver

Select to download the correct printer driver for your operating system.

Select Run or Open dependant on your browser.

Accept the licence agreement and follow the on screen prompts to

install. Select Datamax-O'Neill1110

Continue to follow the on-screen prompts and click Finish/ Close.

Note- You may need to check your downloads folder to install Printer Drivers.

Test Print

Your Printer is now connected.

To test your printer is working correctly follow the steps below-

On a PC

Go to your Control Panel

Select Devices & Printers

Double click on the Printer

(DataMax-O'Neil w1110)

Select Printer from the menu bar

Select Printer Properties

Select General

Select Print Test Page.

Congratulations! You have completed your USB

setup.

and click on the Help icon.