GAM CUOCOJET Manual - Page 8

Browse online or download pdf Manual for Cutter GAM CUOCOJET. GAM CUOCOJET 8 pages. Vegetable-cutting machine

SECTION 5 GENERAL MAINTENANCE

The machine is constructed very carefully and is fitted with high-quality components such as the permanently lubricated

roller bearings used in the transmission mechanism and motor and a special transmission belt. These features will help to

ensure excellent performance of the machine with the guarantee of an operative life expectancy unequalled by any similar

product. Therefore, no maintenance procedure, lubrication or periodic adjustment must be carried out on the machine.

If you press the start button (A fig.4) or 'pulse-operation' start button (B fig.4) and the machine does not run,

proceed as follows:

− Make sure that voltage is supplied to the mains circuit and see whether the socket switch is turned to the ON (I) position.

− Make sure the thermo-magnetic protector and the circuit interrupter have not been triggered and that the controls are in

the correct position.

− Perform a simple test on both these devices by pressing the respective push-buttons.

− Press the start button again on the machine.

If the machine still does not run, a maintenance technician must be consulted. The technician will have to test the above

devices again and check the condition of the fuse used to protect the auxiliary circuit of the machine. The fuse is on the

interface card installed inside the machine. If you see the machine is not working properly, switch it off immediately and

isolate it from the mains circuit by pulling out the plug from the mains socket. Consult the authorized dealer, a specialized

technician or contact the manufacturer directly. The user must not tamper with the machine.

The Builder declines all responsibility, both present and future, with regard to damage to persons or the

environment which may derive from tampering with the machine and in particular with the safety systems

and devices by the user or by persons not expressly authorized by us.

STORING THE MACHINE - WHAT TO DO IF THE MACHINE IS NOT USED FOR LONG PERIODS

If the machine has to be left unused for long periods of time, it must be cleaned thoroughly.

Protect it from dust with a clean dry cloth. Do not cover the machine with plastic bags or sheets of synthetic material as

mould and condensation may develop under them.

415010 en ma 2017-02

8/8