GAM TwinSpin Operating Instructions Manual - Page 5

Browse online or download pdf Operating Instructions Manual for Lighting Equipment GAM TwinSpin. GAM TwinSpin 6 pages. 1 motor

Print Page
MODE 9 OPERATION -- MODE SWITCH = 9 -- 3 CHANNEL OPERATION
•
This mode is equal to DHA/Rosco Mode 3
•
Operates indexing gobo in 16 bit mode for smooth tracking operation when using desk timing for
live movement
•
Set DMX address
•
Indexing gobo is controllable according to the following table:
FIRST CHANNEL %
50%
50 to 99%
50%
1 to 49%
0%
SECOND CHANNEL %
1 to 100%
0%
THIRD CHANNEL %
0 to100%
Index mode is running whenever the second control channel is above zero. Indexing occurs at the
speed and direction set by the first channel of each gobo control. If the speed / direction channel is set
to zero then indexing will take place at 5 Rpm and will take the shortest route to the next set position.
HEXADECIMAL
128
129 to 254
128
1 to 127
0
HEXADECIMAL
1 to 255
0
HEXADECIMAL
0 to 255
FUNCTION
1. Speed and direction of indexing
2. Speed and direction of continuous spin
STOP
0.1 to 25 Rpm counterclockwise spin
STOP
25 Rpm to 0.1 clockwise spin
STOP
FUNCTION
Index position coarse
Index position coarse (8bit) 0 - 359 degrees
Continuous rotation controlled from first channel
FUNCTION
Index position fine
Index position fine (16 bit)
Page 5 of 6
12/06