Hikmicro E Series User Manual - Page 11
Browse online or download pdf User Manual for Thermal cameras Hikmicro E Series. Hikmicro E Series 16 pages. Handheld thermography camera
Print Page
3.2
Power On
Remove the lens cover, and hold
three seconds to turn on the device. You can
observe the target when the interface of the
device is stable.
Power Off
When the device is on, hold
seconds to power off the device.
Set Auto Power-off Duration
In the live view interface, press
Auto Off to set the automatic shutdown time for
device as required.
3.3
The interface of different models may vary. Take
the actual product for reference.
Max. Temperature Display
Real-time Center
Temperature
Center Temperature
Display
Real-time
Temperature
Min. Temperature
Display
4 Capture Snapshots
Steps:
1.
For the first charge, charge the device for
more than 8 hours when the device is
turned on.
The built-in cell battery that powers the
real time clock (RTC) of the device may
drain during longtime transportation or
storage. It is recommended to recharge
the RTC battery for the wellfunctioning of
the device clock.
To fully charge the RTC battery, the
following requirements should be met:
a)
The rechargeable lithium
batteries should be installed on
the device.
b)
The device should keep working
for more than 8 hours before
shutting down.
Power On/Off
Interface Description
Unit
In the live view interface, pull the trigger
to capture snapshot. The live view freezes
4
for over
for three
and go to
Status Icons
Color-
Temperature
Scale
Emissivity