CORBERO CF2P2600W User Manual - Page 13

Browse online or download pdf User Manual for Refrigerator CORBERO CF2P2600W. CORBERO CF2P2600W 14 pages.

Print Page

seals of the freezer when the ambient humidity is large, this is a normal phenomenon, and the

condensation can be wiped away with a dry towel.

Buzz: Buzz will be generated by running compressor specially when starting up or shutting

down.

8. TIPS FOR ENERGY SAVING

Try not to open the door too often, especially when the weather is wet and hot. Once you open

the door, close it as soon as possible.

Every now and then check if the appliance is sufficiently ventilated (adequate air circulation

behind the appliance).

In normal temperature conditions, please arrange the thermostat at the middle setting.

Before loading the appliance with packages of fresh food, make sure they are cooled to ambient

temperature.

Ice and frost layer increase energy consumption, so clean the appliance as soon as the layer is 3-5

mm thick.

If it is the outer condenser, the rear wall should be always clean free of dust or any impurities.

The appliance should be located in the coolest area of the room, away from heat producing

appliances or heating ducts, and out of the direct sunlight.

Let hot foods cool to room temperature before placing in the appliance. Overloading the

appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or

spoil.

Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.

This cuts down on frost build-up inside the appliance.

Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.

Liners interfere with cold air circulation, making the appliance less efficient.

Organize and label food to reduce door openings and extended searches. Remove as many

items as needed at one time, and close the door as soon as possible.

Old units still have some residual value. An environmentally friendly method of disposal will

ensure that valuable raw materials can be recovered and used again. The refrigerant used in your

unit and insulation materials require special disposal procedures. Ensure that none of the pipes

on the back of the unit are damaged prior to disposal. Up to date information concerning options

of disposing of your old unit and packaging from the new one can be obtained from your local

council office.

When disposing of an old unit break of any old locks or latches and remove the door as a

safeguard.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other