GAMA Electronics LRF240VPR1L Instruction Manual - Page 4
Browse online or download pdf Instruction Manual for Receiver GAMA Electronics LRF240VPR1L. GAMA Electronics LRF240VPR1L 4 pages.
Also for GAMA Electronics LRF240VPR1L: Instruction Manual (4 pages)
Print Page
WWW.GAMAINC.COM
All remote-control systems shipped by GAMA Electronics are 100% functionally tested just prior to shipment.
If your RF remote control system does not work out of the box, stops working or functions intermittently please take the
following steps to resolve common issues. Please note that you must be 2-3 feet away from the receiver when operating
the remote control. Operating within 2-3 feet may result in no operation or intermittent operation.
1. Replace the A23 12V Battery in the transmitter
·
The remote control can activate during shipping and drain the battery that is installed in the control. We
send a replacement battery with the system if this occurs.
2. Check the voltage supply at the receiver
·
The receiver is designed to function at 200-260VAC. Voltage on the (+) and (-) terminals on the control
should be within this range.
3. Reprogram the remote control
·
If the system is non-functional try to reprogram the remote control. The program may not have taken
during the programming process or the program button may have been pressed. If the program button is
pressed the memory of the remote controls programed to the receiver are erased.
4. Listen and look for functionality on the receiver.
·
The LED that is used for programming the system will illuminate when the receiver is activated. You will
also hear a "click" when the internal relays engage. If you can see the LED illuminate and you hear the
relay "click" the issue is most likely in the wiring or device being controlled.
Troubleshooting
LRF240VPR1L
Instruction Manual
Page 4 REV A 04/22/20