Main Access 200601T Assembly Instructions Manual - Page 6
Browse online or download pdf Assembly Instructions Manual for Ladders Main Access 200601T. Main Access 200601T 12 pages.
Also for Main Access 200601T: Assembly Instructions Manual (7 pages)
Print Page
Step 21: Pool Installation
Note: Two people are required for installation.
A total weight of approximately 100 lbs. is
required to keep the step from floating once in
place under water. With the assistance of
another person, carefully place the step in the
pool. Place two sealed bags of sand (not
included) into the ballast bags (M) and over the
ballast tray (D) to weigh the step down. Walk the
step back against the pool wall to prevent swim-
behind hazards.
*Optional* Purchase (2) Anchors (#200888) to weigh
down the iStep. Sand not inlcuded.
For Questions Regarding Installation, Please Contact Main Access Customer Service
1-888-333-1134 or [email protected]
Be Sure to Check Out Other Great Products From Main Access!
Model #200601T Assmebly Instructions
Step 22: Deck Mount Installation
With the step in position, with 6"-8" of the pool
wall, slide the deck connectors (H) into position
on either the pool top rail or pool deck. Secure
to the deck with two #8 x 1" screws (N). Use a
minimum of two screws per deck connector.
Secure each deck connector (H) to each upper
handrail (E1) by using a single #8 x 1" screw.
All Finished!