Main Resource Axxent Series Instructions - Page 2

Browse online or download pdf Instructions for Telephone Main Resource Axxent Series. Main Resource Axxent Series 4 pages.

Print Page
To Handle Multiple Calls:
st
nd
Put 1
call on hold by pressing "HOLD" key.
Pick up 2
call by
pressing the blinking line key.
Put 2nd call on hold by pressing
"HOLD" key. Return to the 1st call by pressing its line key.
To Put The System In Night Mode:
(for System Administrator use only)
Press The "Night" key (when the key lights you are in night mode).
To Deactivate Night Mode:
Press the "Night" key (when the light goes out you are out of night
mode).
To Conference Call:
While on the first call, press the "CNF" button or "∞ 5".
Place an intercom or outside call.
Press the "CNF" button or "∞ 5".
Press "CN"F or "∞ 5" again to establish the conference.
To Program Station Speed Dials:
Press "∞ 383".
Enter the Speed Dial Bin (0-9).
Enter the telephone number (up to 32 digits).
Press "#" to accept.
To Use Station Speed Dials:
Lift the handset.
Press an idle line key.
Press the speed dial key or dial "∞ 382" and the speed dial bin number
(0-9).
To pick up a ringing call at another extension:
Press the "Answer" key, then the extension of the phone where the call is
ringing.
To pick up a call holding on another extension:
Press the "Answer" key, then the extension the call is holding on.
To Program System Speed Dials:
Do not lift the handset.
Press "9801".
Enter the 2-digit bin number (01-99).
Courtesy of Main Resource, Inc. Visit us at
www.MainResource.com
or call 800 362-6740 for
all your Inter-tel Axxent needs.
Page 2 of 4