Dynojet Power Vision Installation Manual - Page 5

Browse online or download pdf Installation Manual for Tuner Dynojet Power Vision. Dynojet Power Vision 8 pages. For 2019-2022 can-am ryker 600/900
Also for Dynojet Power Vision: Quick Start Manual (17 pages), Installation Manual (6 pages), Installation Manual (7 pages), Manual (7 pages), Installation Manual (7 pages), Installation Manual (7 pages), Installation Manual (7 pages)

Print Page

SET DYNO MODE

This menu allows you to have the vehicle ignore the front

wheel speed sensor(s) for stationary dyno tuning while

allowing the transmission to shift as normal.

Select Vehicle Tools>Set Dyno Mode.

CONFIGURING GAUGES

This menu allows you to conﬁ gure up to four different gauge

screens. Each gauge screen has four conﬁ gurable channels.

From the Main Menu, select Device Tools > Configure Gauges.

Select a gauge screen and press Enter.

Select a channel and press Enter.

Select a channel from the list and press Enter.

Select the precision or units for that channel and press Enter.

Continue setting up the remaining channels as desired.

Continue conﬁ guring the remaining gauge screens as desired.

LOGGING DATA

Press the Log button to begin logging. The Power Vision

screen will illuminate a bright red banner across the top when

logging.

Press the Log button again to stop logging.

Use the Power Core software to view log ﬁ les.

Snapshot Log: Press and hold the Log button for two

seconds to record the previous two minutes of operating time.

DELETING DATA LOGS

This menu allows you to delete data logs.

Select Vehicle Tools>Delete Data Log.

Select a speciﬁ c log to delete or select *Delete All Logs*.

98200124.06