Dynojet Power Vision PV3-1603C Installation Manual - Page 4

Browse online or download pdf Installation Manual for Tuner Dynojet Power Vision PV3-1603C. Dynojet Power Vision PV3-1603C 8 pages.

Print Page

VIEWING THE VEHICLE INFORMATION

This menu allows you to view the device status (paired/not

paired), VIN #, Model ID, ECU serial number, tune compat, and

checksum compat.

Select Vehicle Tools>Vehicle Information.

VIEWING THE DIAGNOSTIC CODES

This menu allows you to read and clear diagnostic trouble

codes.

To read codes, select Vehicle Tools>Diagnostics>Active

Codes.

To clear codes, select Vehicle Tools>Diagnostics>Clear

Codes.

RESTORING THE ECU

This menu allows you to restore the ECU. Use Restore ECU if

the device does not complete the flash or if your vehicle will

not start.

Select Vehicle Tools>Restore ECU.

RESET ADAPTIVES

This menu allows you to clear the trims which the narrowband

sensor has learned throughout prior drive cycles.

Select Vehicle Tools>Reset Adaptives.

RELEARN DCT

Use Relearn DCT when the MT/AT shift lights are illuminated

solid on the dash or if the vehicle's transmission needs service

or a module was replaced. The DCT relearned sequence does

not show up right away.

Verify the vehicle is up to operating temperature.

Select Vehicle Tools>Relearn DCT.

SET DYNO MODE

This menu allows you to have the vehicle ignore the front

wheel speed sensor(s) for stationary dyno tuning while

allowing the transmission to shift as normal.

Select Vehicle Tools>Set Dyno Mode.

4 HONDA TALON INSTALLATION GUIDE

VEHICLE TOOLS

VEHICLE INFORMATION

DIAGNOSTICS

DELETE DATA LOGS

VEHICLE TOOLS

VEHICLE INFORMATION

DIAGNOSTICS

DELETE DATA LOGS

VEHICLE TOOLS

DIAGNOSTICS

DELETE DATA LOGS

RESTORE ECU

98200124