Hikmicro GH25L Quick Start Manual - Page 9

Browse online or download pdf Quick Start Manual for Digital Camera Hikmicro GH25L. Hikmicro GH25L 10 pages. Handheld thermal monocular camera

Hikmicro GH25L Quick Start Manual
potential radio interference to other users, the
antenna type and its gain should be so chosen
that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for
successful communication.
Conformément à la réglementation d'Industrie
Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un
gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de
réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.)
ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication
satisfaisante.
Safety Instructions
These instructions are intended to ensure that
user can use the product correctly to avoid danger
or property loss.
Laws and Regulations
The device should be used in compliance with
local laws, electrical safety regulations, and fire
prevention regulations.
Transportation
Keep the device in original or similar packaging
while transporting it.
Keep all wrappers after unpacking them for
future use. In case of any failure occurred, you
need to return the device to the factory with the
original wrapper.
Transportation without the original wrapper may
result in damage on the device and the company
shall not take any responsibilities.
Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interface.
Power Supply
The input voltage for the device should meet the
Limited Power Source (5 VDC, 2 A) according to
the IEC61010-1 standard. Please refer to technical
specifications for detailed information.
The battery charger is included in the package.
The input voltage for the supplied battery charger
should meet the Limited Power Source (5 VDC, 2
A).
Make sure the plug is properly connected to the
power socket.
DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
Improper use or replacement of the battery may
result in explosion hazard. Replace with the same
or equivalent type only. The battery type is 18650
with protection board, and the battery size should
be within 19 mm × 70 mm. The rated voltage and
capacity are 3.6 VDC/3.35 Ah (12.06 Wh). Dispose
of used batteries in conformance with the
instructions provided by the battery
manufacturer.
Do not charge other battery types with the
supplied charger. Confirm there is no flammable
material within 2 m of the charger during
charging.
For long-term storage of the battery, make sure
it is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
DO NOT swallow the battery to avoid chemical
burns.
DO NOT place the battery in the reach of
children.
The battery can not charged by external power
source directly.
The device can not be charged, please use the
supplied charger to charge the battery.
Please purchase the adapter by yourself. The
using environment of the adapter should be
consistent with that of the device.
Maintenance
If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the device may be impaired.
Clean the lens with soft and dry cloth or wiping
paper to avoid scratching it.
Using Environment
Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -30 °C to 50 °C (-22 °F to
122 °F), and the operating humidity shall be 95%
or less, no condensing.
DO NOT expose the device to extremely hot, cold,
dusty, corrosive, saline-alkali, or damp
environments.
This device can only be safely used in the region
below 2000 meters above the sea level.
Avoid equipment installation on vibratory surface
or places subject to shock (neglect may cause
equipment damage).
Do not aim the lens at the sun or any other bright
light.
Emergency
If smoke, odor, or noise arises from
the device, immediately turn off the
power, unplug the power cable, and
contact the service center.
Laser
When any laser equipment is in use, make sure
that the device lens is not exposed to the laser
beam, or it may burn out. The laser radiation
emitted from the device can cause eye injuries,
burning of skin or inflammable substances. Before
enabling the light supplement function, make sure
no human or inflammable substances are in front
of the laser lens. Do not place the device where
minors can fetch it.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road,
Xixing Subdistrict,Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products
might be subject to export controls in various
countries or regions, including without limitation,
the United States, European Union, United
Kingdom and/or other member countries of the
Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local
government authorities for any necessary export
license requirements if you intend to transfer,
export, re-export the thermal series products
between different countries.
8