Gama Sonic 301iST60822 Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Outdoor Light Gama Sonic 301iST60822. Gama Sonic 301iST60822 4 pages. 20w solar security & area light with motion sensor and timer

Print Page

Possible places to install the 301iST60822:

• Outside Garage • House Entryway • Patios • Garden • Driveway

• Camping Site • Rural Street • Farm • Green Belts • Square

Solar Lamp Location

For optimum light duration throughout the night, it is very important to mount your solar lamp

in a spot where it will receive the maximum amount of direct sunlight throughout the day.

Post Mount:

Assemble hardware to fixture housing as shown

in the image (make sure the curved side of the

mount faces in). Slide fixture over light post

so the curved side of the mount hugs the light

pole. Adjust the light to the desired height and

position. Then tighten the four bolts.

CAUTION: DO NOT OVERTIGHTEN SCREWS

50 – 70 feet

Fig. 2

Advice: Ideal pole height: 8 – 15 feet; ideal pole diameter: 3 inches.

If multiple lights are purchased, install between 50-70 feet apart for optimal light spread.

Surface Mount:

Make sure the alignment of your mounting

location is level and even for your solar light

installation. Drill four holes into your desired

installation surface using the lamp as a

template and place anchors in to the holes.

Position the four provided screws through the

holes of the lamp and into the anchors. Tighten

the screws to secure the lamp to the surface.

page 3

50 – 70 feet

Note: There are specific types of screws

for different surfaces. If you're unsure of

the appropriate type of screw to use on

your desired surface, please consult a

professional.

Fig. 1