HIKOB GATEWAY H-GW103A Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Gateway HIKOB GATEWAY H-GW103A. HIKOB GATEWAY H-GW103A 2 pages.
Also for HIKOB GATEWAY H-GW103A: Installation Manual (12 pages), Installation Manual (11 pages)

Print Page

Quick Start

Version 2017V2

1 Warning

HIKOB housings are not intended to be mounted or disassembled by the user. The complete

assembly is done by HIKOB or by a representative.

Commissioning

- Connect the HIKOB gateway to a PoE injector via an Ethernet cable.

- The HIKOB gateway is configured to obtain a dynamic IP address using DHCP.

But there is a specific IP configuration to access the HIKOB GATEWAY:

PC Configuration:

IP Address: 172.16.48.249

Subnet mask 255.255.255.248

The HIKOB GATEWAY can be accessed at: https://172.16.48.251

WARNING : to be able to reach the HIKOB GATEWAY this IP configuration must be

into a point to point connection (no router, no IP switch between the HIKOB

GATEWAY and the PC).

- Sensors and routers are autonomous, no action is required for their commissioning

3 Setting up the sensor network

Once the HIKOB gateway is switched on, the sensors will automatically connect to it. This

step can take up to 1 ½ hours because to save their battery, the sensors periodically scan

the radio space when not yet connected.

The reconnection to the HIKOB network can be accelerated by using a magnet to wake-up

the WISECOW sensors.

4 Web-based management and visualization interface

The interface is accessible on the IP network to which the gateway is set, at the following

address: https: // {IP_passerelle_hikob}

For the first connection to the HIKOB GATEWAY you must validate the security exception.

The login is: "admin" and the password: "HiK0B**". 0 is a zero.

5 REST server

A REST server can be queried at the following address: https: // login: password @

{IP_passage_hikob} / URI

02/11/2016 • Page 2