AgSense CROP-LINK Wiring Instructions - Page 6

Browse online or download pdf Wiring Instructions for Control Unit AgSense CROP-LINK. AgSense CROP-LINK 10 pages. 2012 - 14 soil moisture monitoring
Also for AgSense CROP-LINK: Wiring Instructions (8 pages)

Print Page

3. Connect the White wire from the Decagon Sensor to the terminal marked PWR as

shown above.

Wiring the AquaCheck soil moisture probe

Wiring the AquaCheck probe: Only 1 probe can be connected to this unit at a time.

1. Connect the Blue wire from the AquaCheck probe to the terminal marked SOIL as shown

above.

2. Connect the Yellow/Green stripe wire from the AquaCheck probe to any terminal marked

GND as shown above.

3. Connect the Brown wire from the AquaCheck probe to any terminal marked 5V OUT as

shown above.

to the Crop Link Unit

Page 3