Corbin Russwin ASSA ABLOY Access800 Installation Instructions Manual - Page 6

Browse online or download pdf Installation Instructions Manual for Locks Corbin Russwin ASSA ABLOY Access800. Corbin Russwin ASSA ABLOY Access800 20 pages. For ml20800 tcac2 series mortise lockset

Print Page

Handing of Lock Body

Step 1) Move the red locking screw to

side of lock body being locked (Fig. 1)

Step 2) Push in latch then depress catch

plate with screw driver (Fig. 1)

Step 3) Pull latch out of lock body

and turn latch over (Fig. 2)

Figure 2

Step 4) Push in latch while holding

screw driver behind latch tail (Fig. 3)

Note: Push in latch until catch plate is

no longer depressed (Fig. 4)

Step 5) Rotate lock front to match

bevel of door as shown (Fig. 5)

Figure 5

4) Installation Instructions

RED Locking Screw

MAKE SURE CATCH PLATE IS

EVEN W/TOP SURFACE

GOOD

Figure 3

ASSA ABLOY

Catch Plate

Figure 1

BAD

Figure 4

WARNING:

LOCK-IN CAN

OCCUR IF LATCH

IS NOT PROPERLY

INSTALLED

ElectroLynx® is a registered trademark of ASSA ABLOY Inc.

Reproduction in whole or in part without the express written

permission of Corbin Russwin, Inc. is prohibited.