Dynon Avionics SkyView Tuning Manual
Browse online or download pdf Tuning Manual for Autopilot System Dynon Avionics SkyView. Dynon Avionics SkyView 11 pages. Autopilot in-flight tuning procedures
Print Page1. Autopilot In‐Flight Tuning Procedures
Flight Test Preparation
The flight test should be conducted on a clear, VFR day. It is recommended that
clearing turns be performed before executing each procedure.
At many points, the pilot's attention will be divided between documentation,
configuring SkyView, and maintaining situational awareness. Before commencing
the flight test, ensure that you have adequate altitude, clear weather, no traffic, no
obstructions in the flight path, great visibility, no airspace conflicts, etc. If possible,
bring someone along on the first autopilot test flight.
If autopilot behavior, performance, or interference with the controls is cause for concern while
flying, remember that the autopilot can be disconnected in any of the following ways:
• Press the Disconnect/CWS button
• If using the SIMPLIFIED controls:
o Enter the AP Menu (MAIN MENU > AP MENU) and press the TRK+ALT button
• If using the EXPERT controls:
o Enter the AP Menu (MAIN MENU > AP MENU) and press the AP button
• Turn off the autopilot circuit breaker/switch or remove the fuse
SkyView Autopilot In‐Flight Tuning Guide ‐ Revision A
indicates the autopilot is engaged
indicates the autopilot is not engaged
indicates the autopilot is engaged
indicates the autopilot is not engaged
1‐1