Corbin Russwin DC8210 Installation Instructions Manual - Page 7

Browse online or download pdf Installation Instructions Manual for Door Opening System Corbin Russwin DC8210. Corbin Russwin DC8210 8 pages. Multi-sized 1 thru 6

Print Page
DC8200 Jamb Mount Installation Instructions
D
Attach Arm Bracket to Door
NON-HOLD OPEN ARM ONLY:
Standard Position
Normal mounting position.
Position with pivot point
away from hinge.
Away from hinge
For Additional 15% Closing Force
Reposition arm mounting bracket so that
pivot point is toward hinge.
Hinge
FOR REGULAR
FOR MAXIMUM
POWER
POWER
E
Position Arm on Closer
NON-HOLD OPEN ARM ONLY:
Main arm projects
straight out at 90° angle
to door. Install and
tighten arm screw &
washer assembly.
F
Preload and Adjust Arm
NON-HOLD OPEN ARM ONLY:
Open door and slide arm rod into arm loop. Close door,
swing arms so adjusting arm is 90° to frame. With 7/16
wrench, INSTALL and TIGHTEN SCREW SECURELY.
ARM ROD
SCREW
90°
ARM
LOOP
80-9380-8000-152 Rev. 09/06
B
A
C
Previous Page ( 6 )
6
Pivot (away from Hinge)
5/16 HEX HEAD
SCREW & WASHER
ASSEMBLY
MAIN ARM
Extended Maintenance
Lubricate Arm periodically
shaded points
two of appropriate lubricant.
NOTE:
Hold Open Arm,
use any lubricant on the
Holding Surface components.
G
Adjust Door Closer: See Page
D
E
F
G
This Page
HOLD OPEN ARM (A1 Option):
#12-14 X 1-1/2 FH SELF-DRILLING (2)
#12-14 X 1-1/2 FH SELF-DRILLING (2)
OR
OR
1/4-20 X 3/4 FHMS W/ SEX NUTS (2)
1/4-20 X 3/4 FHMS W/ SEX NUTS (2)
Install with dial screw
facing down
HOLD OPEN ARM ONLY (A1 Option):
Main arm projects straight
out at 90° angle to door.
Install and tighten arm
screw & washer assembly.
Remove main arm screw
from elbow joint and
disassemble arm. Thread
the rod into the Arm Bracket
as shown below.
HOLD OPEN ARM ONLY (A1 Option):
While door is closed, adjust the Threaded Arm in
the Arm Bracket until the bearing fits back onto the
"
elbow joint on the Main Arm at 90 as shown below.
RE-INSTALL and TIGHTEN SCREW SECURELY.
at
with a drop or
When lubricating a
DO NOT
7
FRAME STOP
DIAL
SCREW
ARM
BRACKET
THREADED
ROD
°
ARM
BRACKET
MAIN ARM
THREADED
ARM
90°
SCREW
8
5/16 HEX HEAD
SCREW & WASHER
ASSEMBLY
MAIN ARM