Mainlink S2 User Manual - Page 8

Browse online or download pdf User Manual for Extender Mainlink S2. Mainlink S2 12 pages. Wireless hd video transmission

Print Page

receive four videos: CH1-HDMI,CHI1-IPC, CH2-HDMI,CHI2-IPC.

Setting up the address of pulling stream at transmitter network

The network port input of the transmitter supports RTSP IP cameras. The default stream address of

the transmitter is rtsp://192.168.1.100:554/stream0, and the network flow can only be available when IP

address (192.168.1.100) and port (554) are both correct. There are two options to use the network flow:

1. Change the configuration of the IP camera to the stream address supported by our product;

2. Login to the background system of the transmitter through the web (the computer needs to be

connected to the transmitter through the network cable and the default IP of the transmitter is

192.168.1.168. For the connection, the IP segment of the computer also needs to be consistent with the

transmitter); modify the default stream address of IP cameras, as shown in the following chart. Except the

IP address, it is usually unnecessary to change the port and name. Afterwards, click to save, and then click

Reboot to restart the transmitter. Consequently, the video streaming can be accessible from the modified

pull-stream address. RTSP User Name and Password are only used when stream of the IP camera needs to

be authenticated.

Video record （Receiver）

Wireless HD video receiver support video recording. The steps are as follows:

1.Insert USB device, OSD will output "USB device is inserted".

2.Start video recording by pressing receiver "REC".

3.To stop recording, please press "REC" again. After finishing recording, video is automatically saved

to USB storage device.

4.Recording video is saved to USB storage device

版本：V3.0（2018.09）

"HBPVR" document.

第 6页