aireRyder eFan FN4113 Series Instructions For Installation And Use Manual - Page 5

Browse online or download pdf Instructions For Installation And Use Manual for Fan aireRyder eFan FN4113 Series. aireRyder eFan FN4113 Series 11 pages.

Print Page
CLEANING
Risk of injury: Before cleaning the fan, always switch off the power at the main circuit breaker and
wait until the fan has come to a complete stop.
Clean the fan with a dry or damp soft cloth. Do not use any liquids or detergents.
DISPOSAL
Disposal of the fan: You are required to dispose of electric and electronic appliances separately from
your household waste. Please inquire at your municipality regarding proper ways of disposal.
By separately disposing of your electric and electronic appliances, you are participating in recycling and
you are helping to prevent potentially toxic substances from polluting the environment.
Disposal of the packaging: The packaging consists of cardboard and marked plastic and Styrofoam
which can be recycled. Please recycle.
MALFUNCTIONS – TROUBLE SHOOTING
Risk of injury: Inappropriate repairs can lead to the fan not functioning safely. This can cause a
hazard for yourself and your environment.
Most malfunctions are caused by small errors which you can easily resolve by yourself. Please check
the following table before contacting your retailer. This way, you can spare yourself a lot of effort and
cost.
Malfunction
Fan does not turn.
Fan vibrates.
Light does not work.
If you can not resolve the malfunction yourself, please ask your retailer directly.
Please note that the warranty will be voided by inappropriate repairs.

TECHNICAL DATA

Speed
HI
MED
LOW
MANUFACTURER
Vaxcel International Co., Ltd.
121 E North Avenue, Carol Stream, IL, USA
www.vaxcel.com
Underlying cause (error)
Fan switched off?
No mains voltage?
Batteries of remote control empty?
Fan not installed properly?
Lamp defective?
Voltage
230V ~ 50/ 60Hz
Solution
Switch on fan.
Check circuit breaker.
Install new batteries.
Install fan thoroughly according
to installation instructions.
Check and tighten the screws
that connect the blade sets to
the fan.
Exchange lamp.
Power
37W
25W
16W
5