aireRyder F0003 Manual - Page 5
Browse online or download pdf Manual for Fan aireRyder F0003. aireRyder F0003 9 pages.
Print Page
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE
SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN
DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
NOTE: The fan weight is 9.92 lb (4.5 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failure to do so can result in serious injury.
Installation Steps :
Fig.1
Turn OFF the electric power at the
main fuse or circuit breaker box.
Fig.3
Lock Pin
Hanger Pin
Remove the Lock Pin and take off
the Hanger Pin.
Fig.6
Collar Screws
Insert and tighten the two Collar
Screws. Slide Lock Pin into Hanger
Pin until it locks into position.
Wood Member
(2" x 4" Approx.)
Ceiling
Tighten the hanger bracket to the outlet box with two mounting screws.(Make sure
the outlet box is securely installed so that it will be able to support at least the
fan weight.) Attach the safety cable hook to the ceiling with the dry wall screw and
washer, and make sure the safety cable hook is covered by the fan canopy.
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE FOR
FAN SUPPORT"!
Fig.4
Motor Wires
Thread the motor wires through the
downrod stand cover, canopy and
downrod.
Fig.7
Lock Pin
Ceiling Joist
Junction Box
Hanger Bracket
Dry Wall Screw
Fig.2.
Fig.5.
Downrod
Canopy
Downrod Stand
Cover
Hanger Bracket
Hang the fan on hanger bracket,
and make sure the slot of hanger
ball is snapped into the chip of
hanger bracket exactly.
Slot
Note: For slope ceiling installation,
make sure the slot of hanger ball
Chip
and the chip of hanger bracket
face down.
PAGE: 5 / 9
Wood Member
Ceiling Joist
(2" x 4" Approx.)
Ceiling
Washer
Hanger Bracket
Safety Cable Hook
Fig.5
Motor Wires
Hanger Pin
Loosen the collar screws in part way.
Insert the Downrod into the Collar.
Slide Hanger Pin through holes of
Collar and Downrod.
F
A
Junction Box
Downrod
Canopy
Downrod Stand
Cover
Collar
N
C
O
180725