aireRyder F0065 Manual - Page 5

Browse online or download pdf Manual for Fan aireRyder F0065. aireRyder F0065 8 pages.

Print Page

INSTALLATION INSTRUCTIONS

IMPORTANT:

BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE

SHEET "SAFETY INSTRUCTIONS" AS WELL AS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN

DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

SAVE ALL INSTRUCTIONS.

NOTE: The fan weight is 35lbs (15.9kg). Be sure the outlet box you are using is securely attached to the building

structure and can support the full weight of the fan. Failure to do so can result in serious injury.

Installation Steps :

Fig.1

Turn OFF the electric power at the

main fuse or circuit breaker box.

Mounting Plate

Fan Fixture Set

Fig.4

Left fan fixture set and hang on

mounting plate with hook provided,

through one of the two holes in

canopy. This will allow for

hands-free wiring.

CAUTION: Use only a side with

hole in canopy, not hook slot.

Safety cable

Fig.7

Hang the safety cable into the

safety cable hook.

Ceiling

Safety Cable Hook

Fig.2

Screw the safety cable hook to the ceiling outlet box. Insert wires from the

outlet box through the hole in center of mounting plate. Attach the mounting

plate to the outlet box by using two flat washers and mounting screws.

WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED " ACCEPTABLE FOR

FAN SUPPORT OF 15.9KG(35LBS) OR LESS"!

Fan Fixture Set

Fig.5

Make wire connections:

1).The white motor wire to the white

wire from the outlet box with a wire

connector.

2).The black motor wire to the black

wire from the outlet box with a wire

connector.

3). The ground wire from the outlet box

to the ground wire from the mounting

plate with a wire connector.

PAGE: 5 / 8

Fig.3

Fig.6

Wire Connector

Twist wire ends together and

screw wire connectors on

in a clockwise direction. tape wire

connectors and wire together.

instructions that the splics after being

made should be turned upward and

pushed carefully up into the outlet box.

Outlet Box

Mounting Plate

Flat Washer

Mounting Screw

181008