aireRyder FN44322 Manual - Page 6

Browse online or download pdf Manual for Fan aireRyder FN44322. aireRyder FN44322 8 pages.

Print Page

Green (Ground)

Fig.9

Safety Cable Hook

Safety

Cable

Hang the safety cable into the safety cable hook.( See Fig.10)

Blade Screw

Washer

Blade

Blade Holder

Fig.12

Attach blades to blade holders by

using blade screws and washers.

Make wire connections:

1). The white motor wire to the white wire from the outlet box with a wire nut.

2). The black motor wire and blue wire to the black wire from the outlet box with

a wire nut.

3). The ground wire from the outlet box to the ground wire from the motor

with a wire nut.

*** After making the wire connections, the wires should be spread apart with the

Blue

grounded wires on one side of the outlet box and the ungrounded wires on the

other side of the outlet box.

*** After the connections have been made, the wires should be turned upward and

pushed carefully up into the outlet box.

Fig.10

Plastic Insert

Secure blade holders to the motor

with motor screws and washers.

NOTE: Before installing blade

holders to the motor, please

remove the plastic inserts.

Fig.13

Blade Holder

Motor Screw

PAGE: 2 / 4

Fig.11

Hanger Bracket

Screw

Washer

Attach the canopy to the hanger

bracket, and then secure it with

four screws and washers.

Fig.14

Assembly without fan light

Make sure the wires of the fan light

in the switch box are capped with

wire nuts. Secure the switch box

cover with the switch box screws.

Note: To install the fan light, skip

this step and proceed to Fig.15.

090218

Canopy

Switch Box

Screw