Cordex TOUGHPIX DIGITHERM User Manual - Page 6

Browse online or download pdf User Manual for Digital Camera Cordex TOUGHPIX DIGITHERM. Cordex TOUGHPIX DIGITHERM 9 pages. Digital imaging camera
Also for Cordex TOUGHPIX DIGITHERM: User Manual (9 pages), User Manual (11 pages)

Print Page
TAKING PICTURES
IR Imaging
Controls the IR imaging and display modes.
•
IMAGE TYPE: sets the IR display modes.
HIGHLIGHT: Overlays highest temperatures only for hot stop locating.
ATB: Overlays Adaptive Thermal Blending areas determined by ATB high
and ATB low settings.
THERMAL ONLY: IR image only is displayed.
VISIBLE ONLY: VISIBLE image only is displayed.
•
COLOURISATION: Configures the IR image colour palette (as displayed on the
colour bar for reference). Industry Standard colour palettes are available:
Rainbow, Amber, Sepia, Grey positive, Grey negative, Iron, Hot metal.
•
ATB HIGH: Selects the temperature threshold above which the ATB overlay
is active.
ATB HIGH ACTIVATE: Enable or Disable.
TEMPERATURE: selects the temperature threshold.
•
ATB LOW: Selects the temperature threshold below which the ATB
overlay is active.
ATB LOW ACTIVATE: Enable or Disable.
TEMPERATURE: selects the temperature threshold.
•
RANGE: Selects IR temperature range.
Low: low range -10°C to 140°C
High: high range -10°C to 380°C
•
UNITS: Selects the global temperature units.
TEMPERATURE UNITS: Celsius, Fahrenheit, Kelvin.
RUGGED
AUTHORITY
Find Quality Products Online at:

THERMAL ANALYSIS

SPOT Configuration
Configures the active temperature measurement SPOTS & BOX operation.
•
SPOTS/BOX: Configures the number of active SPOTS in the display/BOX display.
Options selectable: 1-SPOT, 2-SPOT, 3-SPOT, BOX.
•
MOVE SPOT/BOX: Selects the ACTIVE SPOT or BOX corner to be moved by the
joystick in the preview display.
Options selectable: 1,2,3 to select the active SPOT (displayed in bold in the
preview display).
•
SPOT1/BOX EMISSIVITY: Configures emissivity of SPOT1 and also the BOX area.
Options selectable: 0.5 to 1.0 in steps on 0.05.
•
SPOT2 EMISSIVITY: Configures emissivity of SPOT2.
Options selectable: 0.5 to 1.0 in steps on 0.05.
•
SPOT3 EMISSIVITY: Configures emissivity of SPOT3.
Options selectable: 0.5 to 1.0 in steps on 0.05.
Global IR Parameter
Configures the GLOBAL IR parameters used by the IR radiometric analysis.
These parameters are shared by all the SPOTS and the BOX area are displayed
on the preview display.
•
REFLECTED T: Configures the GLOBAL reflected temperature.
Options selectable: -10C to 380C.
•
ATMOSPHERIC T: Configures the GLOBAL atmospheric temperature.
Options selectable: -10C to 380C.
•
HUMIDITY: Configures the GLOBAL humidity.
Options selectable: 0% to 100% in steps of 1%.
•
DISTANCE: Configures the GLOBAL distance of the object from the camera.
Options selectable: 1m to 100m in steps of 1m.
GlobalTestSupply
www.
.com
TOUGHPIX DIGITHERM – User Manual
Document Reference CDX8950-507 Rev. B
11