Cordex TOUGHPIX DIGITHERM User Manual - Page 7

Browse online or download pdf User Manual for Thermal cameras Cordex TOUGHPIX DIGITHERM. Cordex TOUGHPIX DIGITHERM 9 pages. Digital imaging camera
Also for Cordex TOUGHPIX DIGITHERM: User Manual (9 pages), User Manual (11 pages)

Print Page

IMAGE REVIEW

Image Review
Displays the stored VISIBLE and IR images for review.
The memory card empty icon is displayed when no memory card is present.
The joystick is used to navigate the stored images.
•
RIGHT and LEFT: moves through the stored images.
•
UP and DOWN: selects either VISIBLE or corresponding IR image.
•
PUSH (short): selects full display of the currently displayed image.
UP: to view VISIBLE image
DOWN: to review the IR image
•
PUSH (short): enters the Delete Image menu.
CANCEL: re-enter the Image Review.
DELETE: deletes the image from the memory card.
WIFI
WIFI access point activation.
•
ENABLE WIFI: select NOW to enable, PUSH (short) to exit WIFI access point.
When WIFI access point is enabled the display shows the following:
•
CAMERA SSID IS DISPLAYED: used to identify the camera for selecting WIFI
connection.
•
CAMERA IP ADDRESS: used by browser to display web-page.
•
FW: WIFI firmware revision.
Refer to the section on the Web browser for image review using a browser.
RUGGED
AUTHORITY
Find Quality Products Online at:

CAMERA SETUP

Time and Date
Used to setup the cameras date and time.
•
YEAR: select current year.
•
MONTH: select current month.
•
DAY: select current day.
•
HOUR: select current hour.
•
MINUTE: select current minute.
•
SECOND: select current second.
•
TIME ZONE: select current time zone offset (hours).
Firmware and Alignment
Both WIFI and camera system firmware are uploaded form this menu.
Displays the current FIRMWARE for the camera. See WIFI for the
module firmware.
Displays the camera serial number: 8-digit Hexa-decimal number.
•
UPDATE FIRMWARE: Camera system firmware update.
Press NOW to update firmware.
•
UPDATE WIFI: WIFI firmware update.
Press NOW to update firmware.
•
ALIGN: IR and VISIBLE image alignment.
Arrows are used to align the IR and VISIBLE images.
Separate instructions for firmware updates will be issued along with the firmware
update file.
GlobalTestSupply
www.
.com
TOUGHPIX DIGITHERM – User Manual
Document Reference CDX8950-507 Rev. B
13