Jadever JWI-700D Series Manual - Page 8

Browse online or download pdf Manual for Accessories Jadever JWI-700D Series. Jadever JWI-700D Series 16 pages.

Print Page

→

Step 3: Install the Indicator (4) on the bracket,

with the bracket aligning with the bracket slot

(8) of the indicator.

Step 4: After connecting load cell connector to load cell port, the installation is completed.

Note: Use the knob pole (7) to adjust the inclination angle of indicator and the screw (6) to adjust

direction of the indicator. After adjusting the indicator to an optimal position, lock the screw.

5. Setting Mode

5-1 Maximum Weighing Capacity & Division Setting

1. Press and hold key

displays "CAP"

MR/

2. Press

"accura" — resolution check.

3. When the window is showing "CAP", press

Method1: Press

to save and return.

→

UNIT

M-/SET

and

release the key and it enters the capacity & division setting

to shift among "CAP" — capacity setting; "DIV"— division setting;

TARE/

MR/

TARE/

→

while powering on the scale. When the window

M-/SET

to enter capacity setting.

to choose the general used capacity. Press

JWI-700D/700S

M+/SAVE