Gamber Johnson 7160-1728 Series Installation Instructions Manual - Page 2

Browse online or download pdf Installation Instructions Manual for Computer Accessories Gamber Johnson 7160-1728 Series. Gamber Johnson 7160-1728 Series 7 pages. Panasonic toughbook 40 laptop docking station

Print Page

PRE-INSTALLATION RECOMMENDATIONS

Conduct a "Bench Test"

Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and

software issues are resolved prior to installation:

Make sure the computer is operational by itself.

Insert computer into the docking station and verify that the computer is

operating in the dock.

Interconnect entire assembly and verify start-up of all components, including

other equipment (printers, modems, scanners, etc.)

Gamber-Johnson recommends positioning of all mounts and equipment in the vehicle

prior to the actual install to verify that mounting locations are safe and practical.

IMPORTANT SAFETY INFORMATION FOR INSTALLERS

Safety is dependent on the proper installation and servicing of this docking station. It is

important to read and follow all instructions before installing this product.

To properly install a Gamber-Johnson docking station you must have a good understanding

of automotive electrical procedures and systems, along with proficiency in the installation

and service of aftermarket vehicle equipment.

There are no adjustments required at any time of the electrical components within the

docking station. Opening the docking station will void the product warranty.

During Installation:

DO NOT connect this docking station to the vehicle battery until:

All other electrical connections are made

Mounting of all components is complete

Verification that no shorts exist in the entire system

DO NOT install equipment or route wires or cords in the deployment path of any air bag.

DO NOT over tighten mounting hardware - recommended torque = 30 in/lbs

When drilling into the vehicle, DO make sure that both sides of the surface are clear of

anything that could be damaged.

CAUTION: If wiring is shorted to the frame, high current conductors can cause

hazardous sparks resulting in electrical fires or flying molten metal.

After installation:

Test the docking station to ensure that it is working properly.

File these instructions in a safe place and refer to them when performing maintenance or

re-installing.

WARNING: Failure to follow all safety precautions and instructions may result in property

damage, serious injury, or death.

2 / 7