dyras PH-2000B Instruction Manual - Page 16

Browse online or download pdf Instruction Manual for Heater dyras PH-2000B. dyras PH-2000B 20 pages. Glass panel heater

Print Page

Connect the heater to the power supply. After the power switch is turned on, a

"beep" will sound, indicating that the power supply is connected but no indication is

displayed on the screen. Press

as:

1. Heated

2. Week

3. Mode

4. Room temperature

5. Time

The default time of the system is 12:30 on Sunday and the temperature is set to 25°C.

If you want to switch gears, press

power, high power, anti-frost. Each time you press the

in turn. Press

ambient temperature drops by 5 degrees within 10 minutes, it is considered that the

user has opened the window and the heater will stop heating and enter standby mode.

button to turn on the timing function. For the first time, "00:00" is

Press the

displayed. Press

hour. Continue to analogy the display as "02:00". Press once again to shut down when

displayed as "24:00".

Press the

key for 3 seconds to set the current time. When the time is turned on,

the default is "12:30". After the first long press the number of hours begins to flash,

indicating that the current time can be designed. You can set the hour pressing the

button; press the

minute begins to flash. Press the

wait 5 seconds or press

If you want to set the temperature, press the

temperature is 20 °C by default, each time you press the buttons, it increase or

decrease the temperature 1°C. The temperature setting range is: 10-49°C. After

setting wait 5 seconds to show the current ambient temperature.

The frost-proof mode is turned on, when the ambient temperature is detected to be

less than 5°C. The heater will automatically turn on the low-gear heating until the

OPERATION

to turn on the heater and press

3 seconds to open the window mode. In this mode, when the

once again, the display as "01:00" to indicate the timing of 1

key again for 3 seconds and the numbers at the

to confirm exit.

again, you can choose different gears: low

buttons to set the minute. After setting,

to display

key, switch once and loop

key, the heater setting