DYS Summer User Manual - Page 8

Browse online or download pdf User Manual for Camera Accessories DYS Summer. DYS Summer 10 pages.

Print Page

Gimbal balance

It is essential to balance the Summer for the best performance. Especially for some extreme sports or

accelerations, accurate balance can improve the shoots quality, as well as the battery life. The balanc-

er will help a lot to adjust the pitch, roll, pan axis while power on. Balance finished and without power,

all 3 axes almost keep in horizontal level, will not deflect one side seriously.

Remove the lens cap and insert memory card after mounting the camera and lens. Make sure

the camera is ready to shoot before balancing the gimbal. Please be sured the power is off

while balance the gimbal.

Step 1: Pitch axis balance

1) Camera locking screw hole is the chute for adjusting camera gravity (see pic 1 of page 7). Adjust

properly ( slightly adjust ) to keep the camera in horizontal level.

2) After balanced, the camera can stay in any tilt angle you rotate.

Step 2: Vertical balance for pitch axis

1) Rotate the camera to one position( note that the lens can reach), remove your hand and adjust the

vertical balance screw, slightly adjust and keep scales of both sides are same. Otherwise, the

camera will deflect to one side, and the tit motor cannot rotate. Adjust again in order that the camera

lens can stay in the position when remove your hands.

2) After adjusted, you should turn the camera by hand to confirm the pitch motor work properly. If

vertical balance need to adjust significantly, the pitch axis balance may be adjusted again. After

that, the camera will stay in that position no matter where you rotated.

Vertical adjustment screw

Scale

Advance pitch adjustment:

If it cannot balance well with vertical adjustment screw, please try to adjust the 4 screws of fixed plate

to balance it.( see pic 2 of page 7).

Banlancer

Vertical adjustment screw

Scale