Gree RVA-150R Owner's Manual Operation & Installation - Page 11
Browse online or download pdf Owner's Manual Operation & Installation for Air Conditioner Gree RVA-150R. Gree RVA-150R 20 pages. Recreational vehicle air conditioner
Print Page
- 1. Air Conditioner
- 1. 1 A few Words about Your New Air Conditioning Unit
- 1. Electrical Data
- 2. Table of Contents
- 2. 2 Electric Diagram
- 3. 3 Packing List
- 4. 4 Specifications
- 5. 5 Operation of Wireless Remote Control
- 6. 6 Control Panel
- 7. 7 Installation Instruction
- 7. Step 1-Selecting an Installation Location & Installing the Roof Top Air Conditioner
- 7. Step 2-Installing the Ceiling Assembly
- 7. Step 3-Electrical Wiring
- 7. Step 4-Completing the Installation
- 8. 8 Troubleshooting Guide
- 9. 9 Normal Maintenance Procedures
Note: If the remote control is missing , operate on the control panel.
2
ON/OFF button
1
Operation starts when pressing this button, and
stops when pressing this button again.
SWING button
2
Activate the automatic air swing function.
FAN SPEED button
3
Select the fan speed AUTO, LOW, MED and HIGH
in sequence.
(+/-) / TIMER button
4
Press the + button to increase the set(operating)
temperature of the unit,and press the - button to
decrease the set(operating) temperature of the
unit. the temperature setting range is from 16~30℃
o
(61~86 F).
Press TIMER button,then press +/- to increase
and decrease the time setting.If the time setting
is no more than 10 hours,the increment/decrement
is 0.5 hour by each press,if more than 10 hours,
the increment/decrement is 1 hour by each press.
The time setting range is 0.5~24 hours.
CONTROL PANEL
3
6
4
- 9 -
1
4
Not available for cooling
only model
5
5
MODE button
Select the operation mode, AUTO, COOL,
DRY, FAN, HEAT(for heating model) or
AUTO, COOL, DRY, FAN(for cooling only
model).
FILTER CHECK button
6
This feature is a reminder of cleaning the air
filter(normal maintenance) for more efficient
operation. The light will turn on automatically
after the fan works more than 250 hours.
If the light is on, turn off and power off the
unit, take the air filter out and clean it, then
re-install the air filter, power on and turn
on the unit, the light will still be on, press
FILTER CHECK button,the light will
turn off.