Adeunis RF ARF26 User Manual - Page 5
Browse online or download pdf User Manual for Control Unit Adeunis RF ARF26. Adeunis RF ARF26 13 pages.
Print Page• Receipt mode
In receipt mode, at least two 37-bit registers (the control register CTRL1 and frequency
register F2) and one 7-bit register (CTRL3) have to be configured. Programming of the
registers must start with F2, followed by CTRL3 and finish with CTRL1. The table below
presents the content of the registers according to the channel:
Channel
F2 (hex)
37 bits
1
05C14DD4C8
2
05B57DD2C4
3
05597C52E2
4
058884E26E
5
0539E5D4D0
6
05C91C50EA
7
056DFD46D8
8
052D6544D0
9
05783DE2D8
• "DATACLK" mode
In receipt mode, a received data synchronisation clock can be available on the DATACLK pin
of the radio module (rising front in the middle of the data). To take advantage of this option,
the control register CTRL2 (27 bits) also has to be configured according to the maximum
transmission rate of the application. In "DATACLK" mode, programming must be started
with F2, followed by CTRL2 then CTRL3, and finally CTRL1.
The table below presents the content of CTRL2 according to the maximum transmission rate
of the application and the content of CTRL1 that has changed (for activation of the
DATACLK).
Transmission rate
Transmission rate
(in Manchester)
2 kBps
2.4 kBps
4kBps
4.8kBps
9.6 kBps
10 kBps
19.2 kBps
20 kBps
39.2kBps
40 kBps
50 kBps
05-11-V3-psn
CTRL3 (hex)
CTRL1 (hex)
7 bits
44
0990000260
CTRL2 (hex)
27 bits
1 kBps
7D40266
1.2 kBps
7D0AD55
2 kBps
7CA0133
2.4 kBps
7C8562B
4.8 kBps
7C42B15
5 kBps
7C40014
9.6 kBps
7C2160B
10 kBps
7C2000A
19.6 kBps
7C10C05
20 kBps
7C10005
25 kBps
7C0CD04
37 bits
CTRL1 (hex)
37 bits
09B0000260
5