AGT INDUSTRIAL AGT-WB24 Product Manual - Page 9
Browse online or download pdf Product Manual for Wheel Balancers AGT INDUSTRIAL AGT-WB24. AGT INDUSTRIAL AGT-WB24 18 pages.
Print Page7 )
Slowly rotate the tire counterclockwise by hand until the indicator light inner is all on. At this point, the highest point (12
o ' clock) on the inner rim is the correct point of unbalance. Add corresponding weight lead at this position. See pic. 4
8)After the weight lead is all placed on，press
5 will be shown, which
2
ALU-2 balance mode (stick on the rim)( ALU-1
sticky positin is different)
1 ) Pls. refer to the above mentioned way of measuring a、b、d, three values.
2) According to shape of rim, press
3) Pls. put down the hood or press
4)
After the wheel stops, the digital tube displays the unbalanced weight
unbalanced weight.
5) turn the tires slowly Anti-clockwise with the hand, until the lateral imbalance indicator lights are all on, at the
point at 12 o 'clock(12H is off) or 9 o 'clock(9H is on) are the position for unbalance point of alignment planes.
Balance alignment planes are as shown in below pictures. Paste corresponding balance weight on the outside
of the wheel rim. See pic.6.
Pic.3
Pic.4
indicates that the dynamic balance is successful
key to light on ALU2.
key to rotate the tire.
key to rotate the wheel，if no mistake during operation, pic.
ALU-3 are the same operation, only the
Pic.5
key to check the actual
，press
9