Deagostini MODEL SPACE Honda CB750 FOUR Assembly Manual - Page 5

Browse online or download pdf Assembly Manual for Toy Deagostini MODEL SPACE Honda CB750 FOUR. Deagostini MODEL SPACE Honda CB750 FOUR 16 pages. Pack 12
Also for Deagostini MODEL SPACE Honda CB750 FOUR: Assembly Manual (16 pages), Assembly Manual (20 pages), Assembly Manual (16 pages), Assembly Manual (16 pages), Assembly Manual (16 pages), Assembly Manual (16 pages), Assembly Manual (16 pages)

Print Page
Deagostini MODEL SPACE Honda CB750 FOUR Assembly Manual
13
Tighten the type E screw from Stage 32
into the hole at the front of the left frame
half, to join the front ends of the two
frame halves.
17
Insert the rear fender (Stage 56) between
the two frame halves and below the rear
frame joint.
14
Reinsert the type Q screw, removed in
Stage 50, into the hole in the left frame
half to secure it to the engine.
18
Place the indicator cables into the two
circled grooves of the frame.
15
When tightening the type Q screw, you
may find that the cross wrench hits the
transmission case cover. Temporarily
remove the cover to make tightening
the screw easier, and then re-fit it.
19
Hold the rear fender in place and turn
the assembly over. Tighten a type G
screw (from Stage 34) into the hole in
the left frame half to secure the fender.
Honda CB750 FOUR: Assembly Guide
16
Use pliers to finish tightening the type Q
screw fully.
20
Position the tail light and rear indicator
cables as shown.
277