Deagostini Model Space HUMMER H1 Manual - Page 18

Browse online or download pdf Manual for Toy Deagostini Model Space HUMMER H1. Deagostini Model Space HUMMER H1 18 pages.

Print Page
HUMMER H1: STEP BY STEP
51
51
Hold the first of the two body pins
supplied with Stage 46 in the needle-nose
pliers, as shown.
54
54
Push the first body pin through the hole in the
projection at the rear of the radio box. The bend in the
pin should be positioned away from the box.
52
52
Hold the circular end of the body pin in the
second pair of pliers, then very carefully
rotate both in opposite directions to cause
the body pin to bend – see photo for Step
53 for the correct angle.
55
55
Repeat with the second body pin, so that the radio box
is fastened shut. Your assembly should look like this.
222
53
53
After
The photo shows the correct angle of the
bend in the body pin. Repeat Steps 51 and
52 for the other body pin. This is to make
it easier to attach and remove the pins in
later use.
Assembled parts
™
Before