AGT INDUSTRIAL AGT-RC72 Product Manual - Page 5

Browse online or download pdf Product Manual for Brush Cutter AGT INDUSTRIAL AGT-RC72. AGT INDUSTRIAL AGT-RC72 19 pages. Skid steer brush cutter

Print Page

Safety precautions

BEFORE OPERATION

1. The operator must read the operation manual carefully before installation, operation
or maintenance. Improper operation will cause the machine damaged or the
operator dead.
2. Read all the safe signs and safe declarations. Obey all the professional safe terms,
local laws or the professional directions.
3. Familiar with the duty Skid Steer Brush Cutter about functions, specs and operation.
Replace the to-be-damaged parts in time. Make sure all the hydraulic installations
and couplings connect firmly, and all the safe signs stick on the suitable positions
clearly.
ALWAYS watch for overhead power lines.
DO NOT place hands or feet under mower deck while blades are spinning.
NEVER operate this brush cutter when bystanders are within 300 feet of your work area.
Flying debris could cause serious injury or death.
 NEVER position your body or limbs under an unsupported cutter deck.
 DO NOT place hands or feet under mower deck while blades are spinning.
 NEVER operate this brush cutter when bystanders are within 300 feet of your work
area. Flying debris could cause serious injury or death.
 NEVER position your body or limbs under an unsupported cutter deck.
 DO NOT allow this machine to contact buildings, utilities, large rocks or tree
stumps or you may lose control of the skid steer loader.
 NEVER use drugs or alcoholic beverages while operating or servicing this machine.
 ALWAYS operate this attachment during daylight or well-lit areas.
 Install this brush cutter on a skid steer loader equipped with a thermoplastic
polycarbonate door panel and side panels only.
 To prevent the skid steer loader and implement from rolling forward, stop the engine
and set the parking brake when exiting the skid steer loader.
 Inspect implement for missing hardware prior to using this machine.
 DO NOT allow children to play on or around this equipment at any time. Store this
implement in an area not frequented by children.
 ALWAYS wear the proper personal protection equipment while operating or
servicing this machine. NEVER operate or service this machine with bare feet,
sandals, or other light footwear.
 ALWAYS wear work gloves when handling cutter blades as they are often very
sharp.
 ALWAYS use eye protection while operating or servicing this machine.
 DO NOT speed Keep your driving speed between 2 and 5 mph.
Control Skid Steer Brush Cutter work, or any operation caused
Wear appropriate safety glasses, goggles or face masks
by dust, flying Debris, or any other hazardous material.