Maintronic XRD600 REG Manual - Page 16

Browse online or download pdf Manual for Lighting Equipment Maintronic XRD600 REG. Maintronic XRD600 REG 18 pages. Dmx-retrofit-dimmer

Print Page

8.4 Operating notes

8.4.1. Derating

In the event of over temperature, an automatic

derating occurs (status derating is indicated by the

LED), which means that the dimmer's power is re-

duced and the load dimmed down.

8.4.2. Short circuit

Automatic shutdown in the event of a short circuit.

Every 30 sec. it is tested whether the short circuit

is still present. As soon as the short circuit is eli-

minated, an automatic restart takes place. If the

error is still present after 5 min, the device is swit-

ched off completely.

Turn off the power and remove the error.

Rated Voltage

Connected Load

Power loss

DMX512 / DMX RDM

Alternative Ansteuerung

Detailed technical data can be found in the data sheet of the product.

Manual

Standby - 0,75W; Operation at full load - 1,8W

1 DMX channel; power supply via external power supply unit

12 - 24V DC is required

parallel connection of modules possible

Push button input

(Universal voltage)

12...230V AC oder DC

XRD600 REG

8.4.3. Noise emission

It may occur that the dimmers cause acoustic noi-

se when they are not used under unfavourable

conditions or with certain consumers.

Make sure the phases are evenly balanced.

8.4.4. Flickering

The dimmer requires a faultless mains, flickering

may occur in case of mains supply fluctuations or

ripple control signals as well as during calibration.

This circumstance is system related and not a de-

fect of the device.

English