Maipu SM3100-52TC-AC Install Manual - Page 15

Browse online or download pdf Install Manual for Network Router Maipu SM3100-52TC-AC. Maipu SM3100-52TC-AC 19 pages. Mypower s3100 series

Print Page

S3100 Install Manual (For SM3100-28TC-AC and SM3100-52TC-AC) V4

Use electromagnetic shielding if necessary.

R a c k C o n fi g u r at ion

The switch size fits the standard 19'' rack. Pay attention to the following

instructions to ensure a good ventilation and air circulation:

All devices on the rack will generate heat during their operation,

therefore vents and fans are required for an enclosed rack. Keep

devices at a certain distance from each other to ensure a good

ventilation and air circulation.

For an open rack, make sure not to block the vents on both sides of

the switch by carefully checking the switch status after its installation.

Caution

Put the switch on a stable and clean desktop as a substitute of a standard

19'' rack, leaving a space of 10mm around the switch for ventilation. And

don't place anything on top of it.

Installation Instructions

Read related chapters in this manual carefully or participate in

concerning technology training before the installation. Make sure all

materials, tools and other items required by the installation are

prepared, as well as a proper site for installation and debugging.

During the installation, it is required to use the brackets and screws

provided in the accessory kit, and proper tools to ensure stability and

reliability. Users should always wear antistatic uniforms and ESD wrist

straps to prevent damaging the switch, and should only use and make

standard cables and connecters. Be cautious to potential dangers

during the installation, and make protective preparations to avoid

accidents.

Clean the site after the installation. Please ensure the switch is well

grounded before powering it on. Users should also maintain the switch

regularly to extend its lifespan.

Do not stare directly at the fiber port during operation to prevent eye

damage caused by the laser transceiver in the SFP optical module of

the switch,

Maipu Confidential & Proprietary Information

Page 15 of 19