Jafanda JF100 User Manual - Page 4
Browse online or download pdf User Manual for Air Cleaner Jafanda JF100. Jafanda JF100 6 pages.
Print Page
Touch "
" to turn on， the button icon lights become all white,
and the airflow defaults to the first gear operation.In the working
Power button
state, touch "
"again and the machine enters the standby state,
the power button and timer button icon lights will be half-lit, the rest
icon lights will be off.
Fan speed
Touch "
" to increase and decrease the airflow speed from
Lv1 ,Lv2 and Lv3.
In Night mode, your appliance will continue to purify the air, but
only runs on its quietest setting and with its LCD screen dimmed.
In the working state, touch "
Sleep mode
it again to wake up the machine.When the icon lights are all off,
you need to touch any key to lit the sleep button and then
touch "
" to wake up the machine.
To prevent accidental touch by children and pets.
Long-press "
" for 3+ seconds to lock, during which all button
icons are off and the control panel cannot be operated by touch,
Satety lock
only the safety lock stays lit.
Long-press "
"for 3+ seconds to unlock, other button icons
resume to light up.
Your appliance will automatically turn OFF/ON after the selected
time. In the standby state, touch "
Timer switch
In the working state, touch "
To set time: touch "
" 4 times to select (2h/4h/8h/cancel t
iming) respectively.
The ambient light at the bottom of the machine will turn on slowly and
then go out every time you reconnect the adapter and then power
on.
In the working state, touch the "
Ambient light
When it goes into standby state, the previous light settings will be
memorized, and the next time you turn it on, it will directly enter the
previous light mode.
5 light modes in turn: ①25%-②50%-③100%-④icon lights and ambient
light OFF-⑤icon lights ON and ambient light OFF
The filter lifespan is 2000 hours, when the remaining time of the filter
life is less than 150 hours, the filter icon light flashes orange, prompting
the user to replace the filter. After replacement, you need to long-press
"
" for 5+ seconds, the light turns white and the filter time will be
Filter reset
cleared and retime. If not, the filter icon light will flash orange every
time the device is turned on. It is not allowed to reset when the filter
button
life is > 150 hours.
Mandatory filter life reset method:
In the standby state long press "
button icon lights flash 6 times and then go out to indicate that the
filter life reset is complete
" to enter sleep mode, and touch
" to active automatic turn on,
" to active automatic turn off.
" to adjust brightness.
" + "
" for 5+ seconds, all the