Maiwe MIEN2218 User Manual - Page 16

Browse online or download pdf User Manual for Switch Maiwe MIEN2218. Maiwe MIEN2218 20 pages. Industrial ethernet switch

Print Page

MIEN2216/18/20&MIEN6216/18/20 Industrial Ethernet Switch

whether there is enough space .

Checking DIN-Rail whether suitable for power input.

Please selected the correct position. As below behind picture shows:

Insert DIN-Rail into DIN-Rail slot and as schematics 2-1 shows turning

equipment.

As schematics 2-1 shows, insert DIN-rail into DIN-Rail slot and confirm the

switch reliable equipment installed on the DIN-rail.

3.2.2. Cable connection

After the correct installation, the cable can be installed and connected,

mainly including the following interfaces cable connection.

Copper port

The 100M copperl port of the terminal equipment provided by this product

is a 10Base-T/100Base-TX Ethernet RJ45 interface. Using a straight-through

network cable to connect to the terminal device, and a crossover network cable

to connect to the network device.

Connecting the network management port

The CONSOLE port of this product can be connected to the serial port of

the control computer.

Connect power

When all other cables are connected, you can connect to the power supply

of the product identification specification.

The Gigabit optical port of this product is a 1000Base-LX full-duplex

single-mode/multi-mode fiber connection port, using SFP hot-swappable

components, optical fiber interface using LC interface.

Attention：

- 12 -